3
INSTALLATION INSTRUCTIONS
7
Tools Required
• ½”
Wrench
• Wire Cutting Tool and Wire Stripper (for DC-3500-KIT)
• 5/16” Allen Key (for Samlex DC-3500-KIT)
• Appropriate screw driver or wrench depending on the DC input terminal of your inverter.
DC-1000-KIT, DC-2000-KIT, DC-2500-KIT
A.
Identify the Positive & Negative cables:
Positive cable: Terminal lugs at each end are covered with red heat shrink as in Fig. 3.1.
Negative cable: Terminal lugs at each end are covered with black heat shrink as in Fig. 3.2.
Fig. 3.2. Negative Cable end
Fig. 3.1. Positive cable end
B.
Connect one end of the positive cable to the positive terminal of the inverter usually red in color.
C.
Identify the components of the Fuse Assembly. Refer to Figures 3.3 to 3.6.
Fig. 3.3. Marine Rated Battery Fuse (MRBF)
Fig. 3.4. Clamping Fixture Bar (CFBAR)
