18 | SAMLEX AMERICA INC.
APPENDIX A
SECtION 4 |
Parameter Setup
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
040 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
The first screen for BULK CURENT parameter setting appears as shown
on the left. The Default Value of 40A will be displayed as “040” using
3 digits. There will be a blinking cursor under the 1
st
digit (“0”). The
1
st
digit (“0”) will also blink. To change the setting to the new value of
50A, the 3 digits will have to be changed from “040” to “050” one
by one as follows:
• As the 1
st
digit of the new setting “050” is “0”, there is no need to
change this numerical value. Press the Enter Key
MoMentARiLY
to select “0” for the 1
st
digit. The blinking curser will automatically
move to the 2nd digit “4”. The 2
nd
digit “4” will be blinking.
• Press the Up Key to scroll the 2
nd
digit to “5”. Press the Enter Key
MoMentARiLY
to select “5” for the 2
nd
digit. The blinking curser
will automatically move to the 3
rd
digit “0”. The 3rd digit “0” will
be blinking.
• As the 3rd digit of the new setting “050” is already “0”, there is no
need to change this value. Now, the overall numerical value will be
“050”. The cursor and “0” at the third digit will be blinking.
• Press the Enter Key,
HoLD for 3 to 4 sec and then release
to
write the new value of 50A into the memory.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Writing to the inverter.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when writing is successful.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
End of setting.
Press
Back
Key to go back to Group select or
Up/Down
key to the
next parameter.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
An exclamation sign ‘!’ is shown when the parameter is out of the
specified programming range. For example, if 90A was entered for
EVO-2224E (EVO-2224E range is 0-70A), it will be out of range and
an exclamation sign ‘!’ will be displayed.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when there is a write failure.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when the set value is out of range. (90 A is out of range
for EVO-2224E).
All programmable parameters (Groups 1 to 7 in Parameter Menu Maps at Figs 4.1 and 4.2)
and their Default Values are described in Sections 4.1 to 4.8.
