SAMLEX AMERICA INC. | 27
APPENDIX A
4.4 PROGRAMMING INFORMATION FOR PARAMETER GROUP NO.1 – CHARGE CURVE
4.4.1 Programming Ranges & Default Values of Parameters Under Parameter
Group No.1 - Charge Curve
Table 4.1 below gives details of programming ranges and default values of parameters under Parameter Group No.1 -
"CHARGE CURVE". Refer to the Menu Map in Fig 4.1
(Section 4.1)
for navigating through various parameters under
this Parameter Group No.1.
TABLE 4.1 PROGRAMMING INFORMATION FOR PARAMETER GROUP NO.1 – CHARGE CURVE
Parameter
Setup
Screen
No. for
Parameter
Group No.1
(Fig 4.1)
Parameter
Programming Range
Default
EVO-
2212
EVO-
3012
EVO-
2224
EVO-4024
EVO-
2212
EVO-
3012
EVO-
2224
EVO-
4024
1
“BULK CURRENT”
(See NOTE 1)
(Bulk Charge Current “Io”)
0-100A 0-130A 0-70A
0-110A
40A
2
“ABSORP VOLTAGE”
(Absorption Voltage)
12.00V - 16.00V
24.00V - 32.00V
14.40V
28.80V
3
“EQUALIZE VOLTAGE”
(Equalization Voltage)
14.00V - 16.50V
28.00V - 33.00V
14.40V
28.80V
4
“FLOATING VOLTAGE"
(Float Voltage)
12.00V - 15.00V
24.00V - 30.00V
13.50V
27.00V
5
“COMPENSATE”
(Temperature Compensation)
3mV to 5mV /C/Cell
4mV /C/Cell
6
“BATT OVER VOLT”
(Battery Over Voltage Shutdown)
14.00V - 17.00V
28.00V - 35.00V
16.00V
32.00V
7
“RESET VOLTAGE”
(Reset voltage for "BATT LOW
VOLTAGE" condition)
12.00V - 17.00V
28.00V - 35.00V
14.00V
28.00V
8
“LOW VOLT ALARM”
(Battery Low Voltage Alarm)
9.50V to 13.50V
19.00V to 27.00V
11.00V
22.00V
9
“BATT LOW VOLTAGE”
(Battery Low Voltage Shutdown)
>9.00V to 13.00V
>18.00V to 26.00V
10.50V
21.00V
10
“LV DETECT TIME”
(Time to qualify "BATT LOW
VOLTAGE" condition)
0 - 600 sec
10 sec
11
“LV CUT OFF TIME”
(Time in "BATT LOW VOLTAGE"
condition to trigger complete
shutdown)
0 - 7200 sec
1200 sec
12
“EQUALIZE-4STAGES”
(4 Stage Adaptive Equalization
On/ Off)
0 = No (3-Stage / 2-Stage)
1 = Yes (4-Stage Equalization)
0 = No (3-Stage / 2-Stage)
SECTION 4 |
Parameter Setup