62 | SAMLEX AMERICA INC.
SECTION 10 |
Programming of Operating Parameters
10.3 PROGRAMMING OF PARAMETERS
10.3.1 List of Programmable Parameters
The values / settings of various operating parameters can be programmed to suit specific application
requirements.
Table 10.1 provides list of programmable parameters, their programmable ranges, setup options and default
values.
10.3.2 Overall Menu Map
Fig 10.1 provides overall Menu Map for all the Operating and Setup Screens. Structure of this Menu Map is
explained in the succeeding Sections.
Navigation through the Menu Maps is carried out through the Left
, Right
, Up
and Down
Keys
(7, Fig 6.1).
All the programmable parameters have been divided into 6 Parameter Setup Groups 1 to 6 that are displayed
in the Main Menu e.g. Parameter Setup Group 3 is for parameters related to “Output Setup” (See Column 2 in
Table 10.1 and Menu Screen in Fig 10.1).
Parameters included in a “Parameter Setup Group” are displayed in the Sub-Menu for that Group (see Column
3 of Table 10.1 and Sub-Menu screens in Fig 10.1). For example, parameter “Output V” is displayed at Item “a”
in the Sub-Menu for Parameter Setup Group 3 for “Output Setup”. Each Parameter has a Setup Screen where
the desired value / option of the parameter is displayed / selected. Some parameters in Sub-Menus like “Buzzer
Setup”, “Relay Setup” and “IP Config” have additional related parameters that are displayed in the “Sub Sub-
Menu” screens.
10.3.3 Structure of Programming Screens
Structure of various screens used in MAIN MENU, SUB MENUS and Setup Screens is explained in Table 10.2:
