5
© 2023 Samsara Inc.
IMPORTANT SAFETY AND USE INFORMATION
This installation guide contains typical information specific to products manufactured at the time of its publication. The contents
of this guide do not constitute a warranty and are for reference only. Consult applicable local laws and ordinances to determine
any installation restrictions. It is the installer’s responsibility to comply with all applicable laws and ordinances when installing this
hardware.
Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product
except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage,
lead to physical injury, or void your product warranty.
Any installation not in accordance with the instructions in the installation guide or otherwise in the Documentation or other than as
described by the relevant IP rating or recommended operating conditions may result in physical injury or property damage. Failure
to follow these directions could result in serious injury or death.
This hardware and any associated software may not be compatible with third party products and/or services and may interfere
with the operations of or void warranties for such third party products and/or services.
Do not install or adjust hardware while driving or operating the vehicle. Do not install this hardware in a location that could interfere
with the driver’s visibility or operation of vehicle controls. Do not install this hardware on or near airbag panels or within the working
range of an airbag.
Do not install hardware while the vehicle is unsecured. Do not install hardware while the vehicle is turned on unless instructed to
turn on the vehicle by the installation guide. Failure to follow installation instructions may cause serious physical injury, damage to
the vehicle or the hardware, and void vehicle or other third party product warranties.
Batteries in the hardware may have a shorter life span if not used in accordance with instructions. Do not short circuit, crush,
disassemble, heat above 60°C/140°F, incinerate, or expose the battery or its contents to water. Do not remove the battery from
the hardware to recharge or for any other reason, including disposal. Do not solder directly to the battery cell. Do not use if battery
appears damaged.
This product includes capacitors and batteries which may present a potential fire, explosion, electric shock, or burn hazard. Do not
touch or come into close proximity to any capacitors within this hardware.
Keep this hardware between -40°C/-40°F to 60°C/140°F externally powered, -20°C/-4°F to 60°C/140°F discharging on battery,
0°C/32°F to 45°C/113°F charging. Failure to keep this hardware in the specified temperature range may result in safety risks.
Failure to follow mounting instructions may create risk of physical injury or property damage from falling objects. If mounting the
hardware to a building wall, check for wiring or plumbing before drilling any holes.
After installation, this product will be able to charge batteries at any moment.
CAUTION SYMBOL, PLEASE REFER TO WARNINGS
DC SYMBOL, TO INDICATE DIRECT CURRENT
