Translation of the original operating instructions
Electrical position indicators type 024.85/024.86/024.87
© 1994 - 2021 SED Flow Control
38
BA210008 Version:
a
Vo
rl
ag
e
: d
o
k360 (
c)
4.2.
Operating temperatures
Warning
Do not exceed or deceed the permitted temperatures!
At temperatures below the freezing point, the control medium must be dried!
The permissible temperatures are dependent on the used materials. Please pay attention to the lowest
permissible temperature. For high temperatures, the maximum possible operating pressure can decrease!
The ambient temperature for the control unit ranges from -10°C to +50°C.
The permissible temperatures for devices with ATEX approval may differ. For further details, please refer to the
respective additional instruction manuals.
4.3.
Safety related data
The position indicators type 024.85/024.86/024.87 are conform to
▪
Low Voltage Directive 2014/35/EU
▪
EMC Directive 2014/30/EU
An ATEX version in accordance with Directive 2014/34/EC is available for use in hazardous areas for type
024.86.
4.4.
Dimensions
The dimensions are identical for the following types: 024.85/024.86/024.87
