16
EB 8140 EN
Measures for preparation
3.5 Accessories
−
Type 4740 Limit Switch with electric mi
-
croswitches to indicate valve OPEN or
valve CLOSED for fail-open or fail-close
version, optionally with 3/2-way sole-
noid valve
−
Type 4740 Limit Switch with inductive
proximity switches for fail-open or fail-
close version, optionally with 3/2-way
solenoid valve
−
Fixture for holding proximity switches
with M12 thread
−
NAMUR adapter to attach a solenoid
valve for valves in DN 15 to 50
−
3/2-way solenoid valve with G
1
/
8
for di-
rect attachment to the actuator (double
nipple required for mounting) in DN 1½
−
0 to 12 bar; 24 V DC or 230 V AC, op
-
tional silencer
−
Double nipple G
1
/
8
x G ¼ detachable,
brass
−
Elbow fitting (order no. 8582-2273) for
valves in DN 65 and 80
4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received against the deliv-
ery note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.1 Unpacking
Do not remove the packaging until immedi
-
ately before installing the valve into the pipe
-
line.
Proceed as follows to lift and install the con-
trol valve:
1. Remove the packaging from the control
valve.
2. Dispose of the packaging in accordance
with the valid regulations.
4.2 Transporting and lifting
Due to the low service weight, lifting equip-
ment is not required to lift and transport the
control valve (e.g. to install it into the pipe-
line).
Transport instructions
−
Protect the control valve against external
influences (e.g. impact).
Note
