5
Converting an
electropneumatic into a
pneumatic positioner
The appropriate conversion kit allows the
electropneumatic positioner to be converted
into a Type 4765 Pneumatic Positioner.
Note:
EB 8359-1 EN then applies for the
converted Type 4765 Pneumatic Positioner.
Required conversion kit for model index
.02.
or lower
for G threaded connection
Order number 1400-6724
for NPT threaded connection
Order number 1400-6725
Required conversion kit for model index
.03.
or higher
for G threaded connection
Order number 1400-6795
for NPT threaded connection
Order number 1400-6796
1. Undo mounting screws and lift the i/p
converter unit together with the printed
circuit board out of the positioner
housing.
2. Remove screw gland (1). Plug on hose
(5) and screw the connecting nipple (4)
of the conversion kit tightly on the
housing.
3. Insert sealing element (7) into connecting
plate (6) and screw tight in the housing.
18
EB 8359-2 EN
Converting an electropneumatic into a pneumatic positioner
1
3
2
4
5
7 6
38
Fig. 15 · Converting the positioner
4
Connecting nipple
5
Hose
6
Connecting plate
7
Sealing element
1
Screw gland
2
Printed circuit board
3
i/p module
Summary of Contents for 4763
Page 22: ...22 EB 8359 2 EN...
Page 23: ...EB 8359 2 EN 23...
Page 24: ...24 EB 8359 2 EN...
Page 25: ...EB 8359 2 EN 25...
