10
Quick Start
15. Turn on the power to the handheld transmitter using
Power ON/OFF switch. Replace the bottom section of the
handheld microphone by sliding it on and then screwing it
back on.
16. Make sure the handheld transmitter is not muted by
setting the Audio switch to the ON position. Speak or sing
into the mic at a normal performance level and raise the
CH3 WIRELESS VOLUME control until the desired level is
reached.
17. If you need to adjust the microphone gain further (signal is
distorted or too week), adjust the LEVEL control inside the
battery compartment using the supplied screwdriver.
Channel 3 - XPD Wireless Microphone (sold separately)
18. Plug the XPD USB receiver into the XPD Wireless USB
jack.
19. Turn the CH3 WIRELESS VOLUME knob on the XP108w
completely counterclockwise to 0.
20. On the wireless handheld transmitter, unscrew the bottom
section of the microphone by turning it counterclockwise
and then slide it off. Place a fresh set of AA (LR6)
batteries in the transmitter battery holder, taking care to
observe the polarity markings, then replace the cover.
21. Turn on the power to the transmitter by pressing and
holding Power switch; the indicator LED will light amber.
22. Speak or sing into the mic at a normal performance level
and raise the CH3 WIRELESS VOLUME control until the
desired level is reached.
Bluetooth®
23. Turn the BLUETOOTH VOLUME control down
counterclockwise to 0.
24. With the XP108w and your
Bluetooth
device powered on;
press the PAIR button on the rear panel of the XP108w to
make the speaker discoverable. The
Bluetooth
indicator
will slowly flash blue.
25. In the settings of your Bluetooth device, set it to “discover”
available devices.
26. From the Bluetooth device list, select the “Samson
XP108W” device.
27. If your device asks for a passkey, enter digits 0000 (four
zeros) and press OK. Some devices may also ask you to accept the connection.
28. The XP108w speaker indicates that pairing is complete when the indicator turns steady
blue. You can now stream audio from your device to the XP108w speakers.
29. With the volume control on your
Bluetooth
device turned up, play some music, and
slowly raise the XP108w BLUETOOTH VOLUME control until you have reached the
desired level.
Using the Master EQ
