XP108w • Portable PA System
13
The XP108w LINE OUT jack allows you to connect the XP108w with any powered speaker to
expand your system or link two XP108w systems together to daisy chain the speakers.
Using a standard shielded 1/4” instrument cable, connect the LINE OUT on the XP108w
to a line level input of second powered speaker. The XP108w will send a mix of all inputs,
including Bluetooth® audio. Each channel VOLUME will control corresponding output level
to the LINE OUT jack.
Using the LINE OUT Jack
Using a Speaker Stand
The XP108w includes a 1-3/8” (35mm) pole mount receptacle on the
bottom of the cabinet. This fits a standard 1-3/8” (35mm) speaker
stand. For maximum coverage when using a speaker stand, the
speaker should be raised above the heads of the listening audience.
Take care when placing the speaker on a stand, to ensure that it is on
a level, steady surface and will not tip over. Use a stand designed to
support a speaker with a minimum weight of 30lb.
