ENGLISH
FRANÇAIS
DEUTSCHE
ESP
AÑOL
IT
ALIANO
Getting Started
1. Remove the mixer by turning the quarter turn screw counterclockwise towards the
RELEASE position.
LOCK
RELEASE
2. Carefully hold the mixer to remove it from the speaker.
3. Remove the accessory compartment
cover by turning the quarter turn screw
counterclockwise towards the RELEASE
position, and remove the included AC and
speaker cables.
4. Replace the accessory panel by aligning
the bottom of the panel with the slots.
Make sure the quarter turn screw is in the
RELEASE position; then close the panel
and turn the quarter turn screw clockwise
to LOCK.
XP300 • Portable PA System
7
Summary of Contents for Expedition XP300
Page 1: ...Owner s Manual...