Samson PowerBrite PB10, Owner'S Manual

3

PowerStrip & PowerBrite Features

The Samson PowerStrip PS10, PowerBrite PB10, and PowerBrite PB10Pro all utilize 

state-of-the-art technology in power distribution and are engineered to the finest 

detail.  Here are some of their main features:
•    Eight switched, rear panel, IEC outlets that allow you to power an entire rack’s 

worth of gear from one source.  In addition, an unswitched front panel convenience 

outlet is provided for temporary power needs (such as plugging in a guitar 

amplifier, soldering iron, etc.). 

•    3-point surge protection, spike clamping protection and RF filtering enables all 

connected equipment to operate with maximum efficiency and minimal noise. 

•   Front panel, re-settable, 10 amp circuit breaker protects all connected gear. 
•    An independent dedicated switch with status light for powering the rear panel 

switched outlets. 

•    In the PowerBrite PB10 and PowerBrite PB10Pro, dual slide out cylinders containing 

LED light clusters that illuminate all gear underneath with cool, clear light.  In 

addition, there is automatic switching for turning on the lamps.  

•    In the PowerBrite PB10 and PB10Pro, a rear panel USB socket to use with the 

included LED gooseneck lamp providing rear rack lighting.

•    In the PowerBrite PB10Pro, a front panel voltmeter and ammeter that allow you to 

monitor changes in the current drawn from both switched and unswitched outlets. 

•    All units are designed to be mounted in the top slot of any standard 19” rack, taking 

only a single rack space. 

•    Rugged construction that makes the Samson PowerStrip PS10, PowerBrite 

PB10, and PowerBrite PB10Pro eminently roadworthy and extremely reliably in 

permanent installation.

•   Four IEC power cables included.