Samson S-zone, Owner'S Manual

5

Controls and Functions

Rear Panel Layout

  I  

 MIC TRIM

 – The rotary control is used to adjust 

the input sensitivity of the microphone pre 
amplifier on channel 2. 

   J 

  MIC/LINE 1

 – This connector includes the con-

nection for a stereo line level and mono micro-
phone input for channel 1.

  K  

 MIC TRIM

 – The rotary control is used to adjust 

the input sensitivity of the microphone pre 
amplifier on channel 2.

  L  

 CH 1 MASTER switch

  – This switch is used to 

enable the ducking function on channels 2, 3 
and 4. 

  M 

 DUCK ENABLE

– Channel 2 will act as a ducking 

master when this switch is pressed in and the 
volume of channels 3 and 4 will automatically 
be lowered when the there is a microphone  
signal on Channel 2.   

  N  

 DUCK ENABLE

 – Channel 1 will act as a duck-

ing master when this switch is pressed in and 
the volume of channels 3 and 4 will automati-
cally be lowered when the there is a micro-
phone signal on Channel 1.

  A  

 AC INPUT FUSE HOLDER

 – Connect the supplied 3-

pin IEC power cable here. 

  B 

  ZONE 1 OUTPUT 

– This connector includes the Zone 

1 Left and Right balanced output connections, along 
with the connections for the REMOTE volume con-
trol. 

  C  

 ZONE 2 OUTPUT

 – This connector includes the Zone 

2 Left and Right balanced output connections, along 
with the connections for the REMOTE volume control. 

  D  

 ZONE 3 OUTPUT

 – This connector includes the Zone 

3 Left and Right balanced output connections, along 
with the connections for the REMOTE volume control.

  E  

 ZONE 4 OUTPUT

 – This connector includes the Zone 

4 Left and Right balanced output connections, along 
with the connections for the REMOTE volume control.

  F  

 LINE 3 AND 4 INPUT

  - This connector is used to 

hook up the LINE 3 and 4 Left and Right input con-
nections.

  G  

 DUCK TRIM

 – This rotary control is used to adjust 

how much signal level is dropped when the micro-
phone activates the DUCK circuit.

  H 

  MIC/LINE 2

 – This connector includes the connec-

tion for a stereo line level and mono microphone 
input for channel 2.