ENGLISH
FRANÇAIS
DEUTSCHE
ESP
AÑOL
IT
ALIANO
Stage 266: Dual Handheld Wireless System
11
5. Place the SR266 receiver where it will
be used (the general rule of thumb is
to maintain “line of sight” between the
receiver and transmitters so that the
person(s) using the transmitter can see
the receiver). Turn on the power of the
SR266 receiver.
6. Turn on the connected amplifier and/
or mixer, but keep its volume all the
way down. Next, make sure that your
transmitter is un-muted by setting
its Audio switch to ON. Then, set the
Volume Control knob on the SR266
fully clockwise; this is unity gain.
Speak or sing into the mic at a normal
performance level while slowly raising
the volume of your amplifier/mixer until
the desired level is reached.
Quick Start Guide
