2
Operation
Note:
A start-up wizard starts automatically when the controller is started for the first time. You
must complete all the steps of the wizard before the controller can be fully used.
The TROVIS 5610 Controller has an interactive touch screen. The backlight of the touch screen
is active while the controller is being operated. Approximately five minutes after the last key has
been pressed, the backlight is automatically dimmed.
The operator keys on the start screen can be used to go to the various menus for operation and
setup:
4
Information menu
with information on sensors, operating modes, system and controller
4
Operation menu
for setting the operating mode and special times-of-use
4
Manual menu
for setting the controller outputs
4
Times-of-use menu
for setting the time schedules
4
Setup menu
for entering the set points and deactivation values, changing the brightness,
contrast or language, performing a display calibration, selecting a system or changing the
configuration and parameter settings
EB 5610 EN
9
Operation
Fig. 1 · Start screen
System date System time
Temperature reading:
Outdoor temperature (for heating systems with
outdoor sensor)
Room temperature (for heating systems with room
sensor, without outdoor sensor)
Flow temperature (for heating systems without
outdoor sensor, without room sensor)
Flow temperature (for DHW circuits)
Additional information, e.g. 'Special
time-of-use active' or 'Manual mode
active'
Operator keys (page 9)
*
Summary of Contents for trovis 5600
Page 22: ...22 EB 5610 EN Setup settings B C D A A...
Page 124: ...124 EB 5610 EN...
Page 125: ...EB 5610 EN 125...
Page 126: ...126 EB 5610 EN Key number 1732...
