ŝ
31
Ş
ƈ
How to use the SHUTTER PRIORITY mode ( )
This mode will set the shutter speed for automatic exposure
depends on the brightness of the object by automatic
aperture value setting in the camera.
Steps 1~2 are the same as those for AUTO mode.
3. Select the SHUTTER PRIORITY mode by rotating
the mode dial.
4. Select the desired shutter speed by rotating the Front
jog dial (JOG1).
5. Point the camera towards the subject and compose
image by using the LCD.
6. Press the shutter button to capture an image.
* High Shutter speeds can capture a moving object in a still
image as if the object is not moving. Low Shutter speeds
can capture a moving object with an ‘active’ effect.
[ Shutter Priority mode ]
ƈ
How to use the MANUAL mode ( )
The user can manually set both the aperture value and
the shutter speed.
Steps 1~2 are the same as those for AUTO mode.
3. Select the MANUAL mode by rotating the mode dial.
4. Select the desired shutter speed or aperture value
by rotating a jog dial.
- Front jog dial (JOG1) : Selecting the shutter speed
- Rear jog dial (JOG2) : Selecting the aperture value
5. Point the camera towards the subject and compose the
image by using the LCD.
6. Press the shutter button to capture an image.
[ Manual mode ]
ƃ
In the manual mode, you can change the aperture value and shutter speed after fixing the
Exposure value by rotating the EVC ring.
ƃ
Available shutter speed, by the aperture value
- Over F2.2 : 15.0 ~ 1/1600 Sec.
- Over F3.2 : 15.0 ~ 1/2000 Sec.
- Over F4.0 : 15.0 ~ 1/2500 Sec.
- Over F5.0 : 15.0 ~ 1/3200 Sec.
- Over F7.1 : 15.0 ~ 1/4000 Sec.
INFORMATION
Recording mode
