background image

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original 

consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited 

warranty period of:

One (1) Year Parts and Labor* 

(*90 Days Parts and Labor for Commercial Use)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the 

United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and 

service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original 

dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service 

center. Transportation of the product to and from the service center is the responsibility of the purchaser.

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or 

reconditioned parts or products if found to be defective during the limited warranty period specified above.  

All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. 

Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.

SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand 

name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products,  

if provided, are on an “AS IS” basis. 

Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and 

except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and 

shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and 

installation; applications and uses for which this product was not intended; altered product or serial numbers; 

cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of 

products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, 

external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in 

service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to 

follow operating instructions, cleaning, maintenance and environmental instructions that are covered and 

prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to 

noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant 

uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO 

WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY 

PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR 

CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE 

LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER 

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS 

PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS 

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST 

SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND 

CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND 

LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND 

THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG 

NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO 

ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR 

EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or 

consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and 

you may also have other rights which vary from state to state.

To obtain warranty service, please contact SAMSUNG customer care center.

The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized 

Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED 

FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE 

PROHIBITED. For a list of Samsung authorized retailers, please go to:  

http://www.samsung.com/us/peaceofmind/authorized_resellers.html.

Summary of Contents for 2020 Q Series














































Reviews: