background image

 

1. Using the D-sub (Analog) connector on the video card.  

Connect the signal cable to the D-SUB port on the Macintosh computer. 

 

[PC] 

 

 

2. Turn on the monitor and Macintosh.  

 

 

 

Connecting to Other devices 

This monitor allows the user to connect it to such input devices as a DVD player, a VCR or 
camcorder, or a DTV or TV without disconnecting the PC.  
The configuration at the back of the monitor may vary from product to product.  

 

1. Connecting AV Devices / Connecting Headphone 

The monitor has AV connection terminals to connect AV input devices like DVDs, VCRs or Camcorders. 
You may enjoy AV signals as long as the monitor is turned on. 

You may connect your headphones to the monitor. 

1. Input devices such as DVD, VCR or Camcorder are connected to the VIDEO or S-VIDEO terminal 

of the monitor using the Video or S-Video cable. 
 

2. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the 

R-AUDIO-L

 port of the monitor. 

 

3. Connect your headphones to the Headphone connection terminal.  

 

4. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 

Summary of Contents for 2032MG

























Reviews: