12
©CMi Worldwide, August 2000
TV setup
The first time the iCEBOX is turned on (or after it has been unplugged), it takes
about 5 seconds to setup and program itself. Once it has finished, you will be
able to access all of the iCEBOX features.
You can adjust the autoprogramming settings by using the Options button on
the remote or keyboard:
1.
Under Options, select TV CHANNEL SETUP. Select the ANTENNA or
CABLE option by pressing GO. Select ANTENNA if cable service is not
available. Select CABLE to view cable-supplied programming.
2.
To automatically scan and store all available TV channels, press the
“Options” key, select TV CHANNEL SETUP, and select AUTOSCAN
CHANNELS. When Autoscan is complete, press the “Go” key and then
“Options” key to exit.
3.
To manually add or erase channels in memory, press the “Options” key and
select TV CHANNEL SETUP. Select EDIT CHANNEL LIST. To delete a
channel, press that number on the keyboard and then hit the zero or “0”
key. To add a channel, press that number on the keyboard and press the
“Enter” or “Go” key.
To erase a previously stored channel number, for example, channel
8: Press 8 and then 0 (zero key) and then press enter.
To add an unstored channel number, for example, channel 8:
Press 8, screen will say Add Program 8, and press “Enter.”
4. To allow all channels to be viewed, press the “Options” key, select TV
CHANNEL SETUP, and CLEAR CHANNEL LIST. Press “Enter” to
complete.
Getting Started
