15
MEDIA.P
P
POWER
P.SIZE
SLEEP
S.MODE
P.MODE
English
03
Basic Featur
es
Picture Options
O
MENU
m
→
Picture
→
Picture Options
→
ENTER
E
Picture Options
Color Tone
: Normal
►
Size
: 16:9
Digital Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
U
Move
E
Enter
R
Return
■
Color Tone (Cool / Normal / Warm1 / Warm2)
✎
Warm1
or
Warm2
will be activated when the
picture mode is
Movie
.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
■
Size
: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9
: Sets the picture to 16:9 wide
mode.
Zoom1
: Use for moderate magnification.
Zoom2
: Use for a stronger magnification.
Wide Fit
: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3
: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit
: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
NOTE
x
After selecting
Zoom1, Zoom2
or
Wide Fit
:
1.
Press the
►
button to select
Position
.
2.
Press the
ENTER
E
button.
3.
Press the
▲
or
▼
button to move the picture up
or down.
4.
Press the
ENTER
E
button.
5.
Press the
►
button to select
Reset
.
6.
Press the
ENTER
E
button to reset the picture
to its default position.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
■
Digital Noise Filter (Off / Low / Medium / High /
Auto)
: If the broadcast signal received by your TV is
weak, you can activate the
Digital Noise Filter
feature
to reduce any static and ghosting that may appear on
the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
■
HDMI Black Level (Low / Normal)
: Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
■
Film Mode (Off / Auto)
: Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
✎
Available in ATV, DTV(interlace), AV, COMPONENT
(480i / 1080i) and HDMI (1080i).
Picture Reset
(Reset Picture Mode / Cancel)
Resets your current picture mode to it's default settings.
■
Reset Picture Mode
: Returns all picture values in the
currently selected mode to the default settings.
[LD403-ZA]BN68-03809A.indb 15
2011-06-22 �� 3:10:51