25
English
The Hotel Option Date of HD450S
No
Hotel TV Function
Description
Category
Item
initial value
1
Hospitality Mode
…
…
2
Power On
Power On Channel
Last Saved
Set the default values that will be applied when the TV is turned on.
•
User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel and Channel Type below.
•
Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
Power On Channel Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
…
•
Select channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band)
Power On Volume
Last Saved
•
User Defined : Lets you set the Power On Volume manually. See Power
On Volume below.
•
Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
Power On Volume Num
…
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume
100
The maximum Volume Level the user can set in Stand Alone Hospitality
mode.
Power On Source
TV
Select the input source the TV displays when turns on.
Power On Option
Last Option
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
•
LAST OPTION : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
•
Power On : When the power returns, the TV turns on.
•
Standby : When the power returns, the TV enters the Standby mode.
3
Channel
Channel Setup
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Program, Antenna
selection, etc.
Channel Editor
…
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
•
Change the channel numbers and names, and sort the channels in your
desired channel number order.
•
Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without your having to display
each channel directly.
Dynamic SI
OFF
•
On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
•
Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme number
update is not supported)
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and the
transmitted data , the TV autotunes the channels to restore the data/
parameters in the channel map.
•
On: When Channel Rescan Message is ON, The OSD showing that the
channels are being rescanned will be displayed to Hotel Guests.
•
Off: A Hotel Admin can turn the Channel Rescan Message OFF, if the
rescan message OSD should not to be displayed to Hotel Guests.
