44
GB
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
◆
a CD player ;
◆
a microphone connected to a sound system ; or
◆
a cassette player.
Note:
Audio dubbing is applicable only to the linear audio track .
1
Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L+R) on the front of your VCR.
3
Insert the pre-recorded video cassette on which the audio track is
to be replaced.
4
Select the LINE 1 input by pressing INPUT until L I is displayed.
5
Locate the point on the cassette at which you wish to start dubbing.
6
Press P/STILL ( ).
7
Press A.DUB.
Result:
Your VCR is now in the Audio Dubbing Pause mode.
8
On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
Example: The track that you wish to record on the cassette.
9
Press the pause button on your sound system.
10
When you are ready:
◆
start playback on the sound system ; and
◆
press REC or P/STILL ( ) on the remote control.
Result:
The soundtrack is replaced on the pre-recorded video
cassette.
11
When you have finished recording, press STOP (
).
Audio Dubbing a Pre-recorded Cassette
ART INPUT
2
3
5
6
8
9
0
CLR/RST
CH
STROBE AUDIO
4
0
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
INPUT
OUTPUT
STOP
5
6
DISPLAY MONITOR A.DUB
REC
P/STILL
NPUT
OUTPUT
STOP
7
DISPLAY MONITOR A.DUB
REC
P/STILL
INPUT
OUTPUT
STOP
10
11
10
SV-5000W/SECA5 4/1/1 12:20 AM Page 44
