English - 56
Setting Up Anynet
+
The following settings help set the functions.
To use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must be set to On
1.
Press the
TOOLS
button.
Press the
ENTER
button to select “(HDMI-CEC)”.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2.
Press the
ENTER
button to select "Anynet
+
(HDMI-CEC)", then press the
ENTER
button.
,
Press the ▲ or ▼ button to select "On", then press the
ENTER
button.
The “Anynet
+
(HDMI-CEC)” function is enabled.
If you select “Off”, “Anynet
+
(HDMI-CEC)” is disabled.
When the “Anynet
+
(HDMI-CEC)” function is disabled, all the Anynet
+
related
operations are deactivated.
Setting an Anynet
+
Device to turn Off Automatically when the TV is Turned Off
2.
Press the ▲ or ▼ button to select “Auto Turn Off”, then press the
ENTER
button.
.
Press the ▲ or ▼ button to select "Yes", then press the
ENTER
button.
The "Auto Turn Off" function is enabled.
If you select "No", the "Auto Turn Off" function is canceled.
Press the
ExIT
button to exit.
The active source on the TV remote must be set to TV to use the Anynet
+
function.
If you set “Auto Turn Off” to “Yes”, connected external devices are also turned off when the TV is turned off. If an external
device is still recording, it may or may not turn off.
Scanning and Switching between Anynet
+
Devices
1.
Press the
TOOLS
button.
Press the
ENTER
button to select “(HDMI-CEC)”.
Anynet
+
devices connected to the TV are listed.
2.
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
button. It is switched to the selected device.
.
If you cannot find a device you want, press the ▲ or ▼ button to select "Searching
Connections", then press the
ENTER
button.
The meassage "Configuring Anynet
+
connection..." is displayed.
When searching devices completes, the connected devices are listed in the Anynet
+
menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the
POWER
button, devices connected when the TV
is already on are not displayed in the device list.
In this case, select the Searching Connections menu to search devices.
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the Anynet
+
function. Make sure to
switch to an Anynet
+
device by using the
TOOLS
button.
Setup
(HDMI-CEC)
: On
►
Auto Turn Off
: Yes
►
Searching Connections
►
Enter
Return
Move
(HDMI-CEC)
: On
Auto Turn Off
: Off
Searching Connections
Enter
Return
Move
No
Yes
Setup
Setup
(HDMI-CEC)
: Off
Auto Turn Off
: Off
Searching Connections
Off
On
Enter
Move
Return
Recevier:
On
Connect Recorder
Setup
Air 28
Enter
Move
Return
Recevier:
On
Connect Recorder
Setup
Air 28
Enter
Move
Return
BN68-01392H-01Eng.indd 56
2008-04-14 ¿ÀÈÄ 1:20:40
