Samsung 550 Series User Manual Download

Page: 242 / 246

◀

▶

English

◀

To lock the product, follow these steps:

Wrap the Kensington Lock cable around a large, stationary object such as desk

or chair.

Slide the end of the cable with the lock attached through the looped end of the

Kensington Lock cable.

Insert the locking device into the Kensington slot on the product.

Lock the lock.

These are general instructions. For exact instructions, see the Users manual
supplied with the locking device.

The locking device has to be purchased separately.

The location of the Kensington slot may be different depending on the TV
model.

Summary of Contents for 550 Series























































































































































































































































Search results

Summary of Contents for 550 Series

Reviews:

Related manuals for 550 Series

Brands by name

Popular brands

Samsung 550 Series, User Manual

Search results

Summary of Contents for 550 Series

Reviews:

Related manuals for 550 Series

Brands by name

Popular brands