background image

Precautions and Notes

You can get instructions and information that you must read after installation. 

Before Using the Recording and Timeshift Functions

Read these instructions before using Recording and Timeshift. 

Before using the recording and schedule recording functions

Recording may not be supported depending on the model or geographical area.

• To set up a Schedule Recording, you must first set the TV's clock. Set the 

Clock

.

 

Settings General System Manager Time Clock

• You can set up a maximum total of 30 

Schedule Viewing

 and 

Schedule Recording

 entries.

• Recordings are DRM-protected and therefore cannot be played back on a computer or on a different TV. In 

addition, these files cannot be played back on your TV if its video circuit has been replaced.

• For a USB device for recording, it is recommended to use the USB hard disk that supports USB 2.0 or later and 

5,400 rpm or higher. However, RAID-type USB hard drives are not supported.

• USB memory sticks are not supported.

• The total recording capacity may differ with the amount of available hard drive space and the recording quality 

level.

Schedule Recording

 requires at least 100 MB of free space on the USB storage device. Recording will stop if the 

available storage space falls below 50 MB while recording is in progress.

• If the available storage space falls below 500 MB while both the Schedule Recording and Timeshift functions are 

in progress, only the recording will stop.

• The maximum recording time is 720 minutes.

• Videos are played according to the TV settings.

• If the input signal is changed while recording is in progress, the screen will go blank until the change is made. In 

this case, recording will resume, but   will not be available.

• When using the Record or Schedule Recording function, the actual recording may start a second or two later 

than the specified time.

• If the Schedule Recording function is operating while a recording is being made on an HDMI-CEC external device, 

the priority is given to the Schedule Recording.

• Connecting a recording device to the TV automatically deletes abnormally saved recorded files.

- 124 -

Summary of Contents for 55LS03










































































































































































































































Reviews: