Confidential
Chapter 2 Installing System
5G CPE Outdoor Installation Manual v1.0
19
Copyright © 2018, All Rights Reserved.
Figure 14. Marking Wall Type
To drill the anchor holes
1
Ensure that the items mentioned in below table are available.
Table 7. Tools for Drilling
Category
Description
Woking Tools
Hammer Drill
Drill Bit (1/4 inch)
Vacuum Cleaner
Table 8. Anchor Bolt Drill Bits and Hole Depth
Category
Anchor Bolt
Drill Bits
Hole Depth
CPE Outdoor
Φ 6
1/4 in. (6 mm)
1.4 in. (35 mm)
2
Drill anchor holes at the marked points. Remove dust from the holes using a
vacuum cleaner.
[O]
* Remove the debris from the drilled hole.
[Anchor Hole Cross Section]
35 mm
(1.4 in)
[X]
1/4 in.
(6 mm)
2.49 (64)
Unit: in. (mm)/ Marking Point
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
3
.6
9
(
9
3
.8
)