ENG - 8
•
If “
TV ARC
” does not appear in the display window of the Soundbar main unit, confirm that the
cable is connected to the correct port.
•
Use the volume buttons on the TV’s remote control to change the volume of the Soundbar.
NOTES
•
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
•
If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
•
We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
•
must be turned on.
•
This function is not available if the HDMI cable does not support ARC.
Connecting using an Optical Cable
WIRELESS
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
Optical Cable
(not supplied)
Bottom of the Soundbar
D.IN
Right Side of the Soundbar
1.
Connect the
DIGITAL AUDIO IN (OPTICAL)
jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
2.
Press the
(Source)
button on the right side panel or remote control, and then select the “
D.IN
”
mode.
Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1.
Connect the Soundbar and a TV with a digital optical cable (not supplied).
2.
Press the
(Source)
button on the right side panel or on the remote control, and then select
“
D.IN
”.
