English - 7
02. Turning on the TV and Cabling
Turning on and Controlling the TV
You can turn on the TV using the Remote Control or the TV’s Controller, a small joystick-like button on the back
of the TV in its lower-left corner. You can also use the TV's Controller to operate the TV without the Remote
Control.
m
R
P
Open Smart Hub.
Turn off the TV.
Select a source.
Open the menu.
TV Controller
The control stick is located on the
lower-left corner of the back of the TV.
Remote control sensor
When you use the Remote Control, the standby LED
does not light, except when you press the
P
button.
Arrange the cables using the Cable Holder
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and ports are shown
below.
Cable Plugs
Ports
HDMI
USB
Optical
Warning
Do not plug cables in upside down.
Be sure to check the orientation of the
plug before plugging it in.
- The TV does not support HDDs (Hard Disk Drives) connected to the USB port.
[UH6203-ZX]BN68-06330H-00L02.indb 7
2014-08-29 1:21:16