◀
▶
English
◀
Manual
: Set the current time manually.
N
Depending on the broadcast station and signal, the auto time set up
may not be correct. In this case, set the time manually.
–
Clock Set
: Set the
Date
and
Time
.
Select
Clock Set
. Select
Date
or
Time
, and then press
ENTER
E
. Use the
number buttons to enter numbers or press the up and down arrow buttons.
Use the left and right arrow buttons to move from one entry field to the next.
Press
ENTER
E
when done. To exit
Clock Set
, select
Close
, and then
press
ENTER
E
.
N
Available only when
Clock Mode
is set to
Manual
.
N
You can set the
Date
and
Time
directly by pressing the number buttons
on the remote control.
