Installation Instructions CP 5611 A2
Installation Instructions CP 5611 A2
46
A5E00469482-01
2.2 Installing and Connecting
2.2.1 Requirements and Notes
Computer Requirements
The CP 5611 A2 module is a plug and play network card
for devices with a 32-bit PCI bus interface conforming with
the PCI V2.2 specification.
The CP 5611 A2 is universally coded according to the PCI
standard, in other words 3.3 and 5 V slots are supported.
PCI-X slots with 32 or 64 bits are also supported. The
module has the dimensions of a short PCI module
(102 mm x
130 mm).
Note
For the DP mode, at least a 166 MHz Pentium processor
or comparable processor is recommended.
Software Requirements
The software for operating the module is not supplied with
the module. You can order this from your Siemens contact.
Possible Number of CP 5611 Modules in One Computer
A maximum number of two CP 5611 modules are permitted
in a PG/PC at the same time.
