16
For further information, visit videotron.com/terminal-support.
CHANGE How yoUR REMoTE CoNTRoL IS pRoGRAMMED
Changing the volume button:
When you program your remote control to your TV and audio system, the volume button will
work with the device that you programmed last. To control the volume via your TV or audio
system, please refer to the following instructions.
To control the volume via your TV:
1. Hold down
and
until the red light beneath
blinks twice, then release both
buttons.
2. Press
9-9-3
, The red light will blink twice.
3. Press 2.
To control the volume via your audio system:
1. Hold down
and
until the red light beneath
blinks twice, then release both
buttons.
2. Press
9-9-3
. The red light will blink twice.
3. Press 3.
RESETTING yoUR REMoTE CoNTRoL
If you would like to reprogram your remote control to other devices or if you are having
problems getting it to work, you can reset it by following these steps:
1. Hold down
and
until the red light beneath
blinks twice, then release both buttons.
2. Press
9-7-7
on your remote control. The red light will blink four times to confirm that the
remote control has been reset.
EqUIpEMENT SETTINGS
This section will help you to configure your video and audio preferences so that you can get
the most out of your HD TV and new terminal.
Accessing your terminal preferences:
1. Press
to go to the main menu.
2. Using
, select
Settings
then
Equipment Settings
, then press
.
