40
English
No
Hotel TV Function
Description
Category
initial value
16
Widget
Solution
Widget Mode
OFF
Widget Mode On and Off
Solution Type
...
Select the solution type (It depends on model -Vendor Server, SINC Server).
Server URL Setting
...
Setting the server URL.
License Server IP Setting
...
Setting the server IP.
IPTV Mode
...
Use the IPTV mode (it depends model - Only IPTV model support it).
Virtual Standby
...
Use the virtual standby mode or not.
When Virtual Standby On, TV power consumption will be 9.5W to 17.4W
(Depends on inches).
Instant On
…
The fast TV booting mode On/Off.
Room Num Setting
...
Setting Room Number.
17
Door Eye
Door Eye Mode
OFF
Door Eye function ON and OFF
Door Eye Source
...
Select the source that will display the door image (Source selection is AV).
Prompt OSD
...
Prompt OSD mode ON and OFF
−
On: The OSD which is asking if you want the output will be displayed.
y
If the user press 'Yes', door image will be displayed in PIP or Full screen.
y
If the user press 'No', Door Eye function will not work.
−
Off: OSD will not be displayed and automatically changed to PIP or Full size
screen
Source Return Time
...
Setting the time that decide how long will be displayed the door image.
18
System
Self Diagnosis for TV
Enter Self Diagnosis Menu.
−
Picture Test: Use to check for picture problems. If the problem appears in
the test picture, select Yes and follow the directions on the screen.
−
3D Picture Test: Use to check for 3D picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
−
Sound Test: Use the built-in melody sound to check for sound problems. If
the problem occurs during the test, select Yes and follow the directions on
the screen.
−
Channel information: check up every channel information
−
Reset: Self Diagnosis for TV state reset
Self Diagnosis for HTV
HD Function Check Menu On Executing Item Below OSD is diaplayed.
−
STB SI Vendor Setting: SI Name Success/Failure
−
Bathroom AMP: Success/Failure
−
RTC: Success/Failure
SW Update
SW USB Update function
Service Pattern
OFF
Same function with SVC Service Pattern
Sound Bar Out
OFF
−
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound(HDMI3).
−
OFF: Sound will come out through TV speakers normally.
Contact Samsung
Samsung Contac information
TV Reset
Factory reset
−
If user edit extermal source to channel list, when TV power on by external source, TV does not show my channel OSD after power on. In
menu, the broadcast item is dim, user can choose genre mode by channel list.
−
When TV in the PC source, Apply picture Mode Keeps dim.
−
If the hotel does not use cable and air antenna both, the Mix Channel Map option should be set as "Off".
