50
English
Advanced Features
¦
Recording
You can make a recording of a TV Programme using a Samsung recorder.
1.
Select
Recording
.
✎
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the
Device List
.
✎
When the recording device is not displayed, select
Device List
and press the Red button to search devices.
2.
Press the
EXIT
button to exit.
✎
You can record the source streams by selecting
Recording
: (device_name).
✎
Pressing the
�
(REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
¦
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the
TV Speaker
.
1.
Select
Receiver
and set to
On
.
2.
Press the
EXIT
button to exit.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO
OUT (OPTICAL)
jack of the TV.
✎
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
NOTE
x
You can only control devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the device.
x
The functions do not operate with other manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1.
Select
Receiver
and set to
On
.
2.
Press the
EXIT
button to exit.
✎
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI
IN 2 (ARC)
port.
✎
To disable the ARC function, set the
Receiver
to
Off
. Even if the TV transmits the ARC signal continuously, the receiver
will be blocked from receiving the signal.
[UC9000]BN68-02820B-XH-1.indb 50
2010-05-24 오후 1:58:47
