About the software
Setting up the application software
《
60
》
■
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
■
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display. Click the
[Install] menu in the Auto run frame.
2. Install the DirectX, Digimax Master by selecting a button shown on the
monitor.
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the
PC, you should first install the camera
driver.
※
This manual is based on the
Digimax A503. A403 may differ
from A503 in some contents.
●
Be sure to check the system requirements before installing the driver.
●
You should allow 5 ~ 10 seconds for running the automatic setup program
according to the capability of the computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root
directory.
INFORMATION
■
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. But you can use the camera
with Mac OS 10.0 ~ 10.3.
■
Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.
