2-13
Installation and Connection
2-13 Connecting to VCR/Camcorder
1.
Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using a video
cable.
If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector.
Using the S-VIDEO connection provides a higher visual quality.
2.
When finishing connecting the devices, connect the power of the projector and the VCR/Camcorder.
Using the Projector
1.
Turn on the projector and press the [Video] button to select <Video>.
or
Press the [S-VIDEO] button to select
<
S-Video
>
.
•
Check that the projector and the video equipment are turned off before connecting cables.
•
This projector does not support sound. (Separate audio system is needed for sound.)
Summary of Contents for A600B
Page 29: ...Using 3 5 3 5 3 Setup ...