background image

9

ENGLISH

Do not spray volatile material such as insecticide onto the surface of the 

appliance.

f

f

As well as being harmful to humans, it may also result in electric shock, fire or 
problems with the product.

Do not drink the water from the air conditioner.

f

f

The water may be harmful to humans.

Do not apply a strong impact to the remote controller and do not disassemble 

the remote controller.
Do not touch the pipes connected with the product.

f

f

This may result in burns or injury.

Do not use this air conditioner to preserve precision equipment, food, animals, 

plants or cosmetics, or for any other unusual purposes.

f

f

This may result in property damage.

Avoid directly exposing humans, animals or plants from the air flow from the air 

conditioner for long periods of time.

f

f

This may result in harm to humans, animals or plants.

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety. Children should be 

supervised to ensure that they do not play with the appliance.
Max current is measured according to IEC standard for safety and current is 

measured according to ISO standard for energy efficiency.

FOR CLEANING

WARNING

Do not clean the appliance by spraying water directly onto it. Do not use 

benzene, thinner, alcohol or acetone to clean the appliance.

f

f

This may result in discoloration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, cut-off the power supply and wait 

until the fan stops. 

f

f

Failing to do so may result in electric shock or fire.

S-east_MEMORY_IBIM_EN_03955A-02_EN.indd   9

2014-10-28   오후 12:00:46

Summary of Contents for AF28FVSDA Series

























































Reviews: