Samsung AG026TN1DKH/EU, Installation Manual

4

Safety Information

English

Sa

fe

ty

 In

fo

rm

at

io

n

•  Make sure that there are no other products or objects 

under the fan coil unit.

– Water falling from the product may cause fire or 

property damage.

•  Electric work must be performed by a qualified 

electrician in accordance with the with the "local 
regulations" and "code" and this installation manual.

– If the capacity of the power supply circuit is 

insufficient or the electrical work is performed 
incorrectly, it may cause electric shock or fire.

•  For the power supply of the fan coil unit, use a dedicated 

power supply line of the rated power or more.  
In addition, do not extend the power cable arbitrarily.

– If the connection is incomplete, it may cause fire.

•  Be sure to arrange the electrical wires so that the 

structure of the electric device including the cover is 
not lifted, and secure the cover firmly.

– If the cover is installed incorrectly, it may cause the 

terminal parts to overheat, leading to electric shock 
or fire.

•  For the parts and tools used in installation, be sure to 

use the supplied accessories and the specified parts 
an tools.

– Failure to use the supplied accessories and the 

specified parts may cause product malfunction, 
water leakage, electric shock, or fire.

•  After the installation, be sure to check for water 

leakage.

– After finishing the installation work, check that 

there is no water leakage. If water leaks contact 
with a fan, heater, or stove, etc., it may cause fire or 
property damage.

•  Make sure that you earth the cables. 

– Do not connect the earth wire to the gas pipe, water 

pipe, lighting rod, or telephone wire. Incomplete 
earthing may cause electric shock or fire.

•  Perform the installation work according to this 

installation manual.

– Incomplete installation may cause water leakage, 

electric shock, or fire.

•  After completing the installation, check the following 

before operating the product:

– The piping is connected correctly and securely, and 

there is no water leakage.

•  Do not modify and extend the power cable. Avoid 

complicated wirings.

– Failure to do so may cause connection defect, 

insulation defect, or overcurrent, leading to electric 
shock or fire.

– If you need to extend the power cable because it 

is damaged, follow "Extending the power cable" in 
this installation manual.

•  Before performing electrical wirings for the fan coil 

unit, be sure to disconnect the main power

– Failure to do so may cause electric shock.

•  Depending on the installation location, an earth 

leakage breaker must be installed.

– Failure to do so may cause electric shock.

•  Do not modify the product arbitrarily.

– Failure to do so may cause product malfunction, 

electric shock, fire, or personal injury.

•  When the fan coil unit is fixed inside the ceiling, be 

careful that the power cable, water pipes, and electric 
parts are not subject to water or external impact.

•  Be sure to connect the power cable to an auxiliary 

circuit breaker (ELCB, ELB, MCCB) dedicated to the fan 
coil unit.

– If a dedicated auxiliary circuit breaker (ELCB, ELB, 

MCCB) is not installed, the power supply may not 
be cut off in case of over current or current leakage, 
leading to electric shock or fire.

•  Make sure that the wiring is securely connected using 

the specified wires, and securely fix the wires so that 
no external force from them is applied to the terminal 
connection part.

– Incomplete connection or fixation may cause heat 

or fire.

•  Be careful that the room power supply is not out of 

the voltage range (minimum voltage to maximum 
voltage).

– Failure to do so may cause damage to electrical 

parts or degradation to part performance, leading 
to product malfunction.

After installing the fan coil unit

•  After completing the installation, be sure to check for 

leakage from the water pipes.