26
Installation Procedure
English
Installation Pr
oc
edur
e
5
Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Method 1
Method 2
40 mm
Insulation tape
Insulation tape
35 mm
6
Apply heat to the contraction tube to contract it.
Method 1
Contraction tube
Contraction tube
Method 2
7
After tube contraction work is completed, wrap it with
the insulation tape to finish.
Three or more layers of insulation are required.
Method 1
IInsulation tape
IInsulation tape
Method 2
CAUTION
• Make sure that the connection parts are not exposed to
outside.
• Be sure to use insulation tape and a contraction tube
made of approved reinforced insulating materials
that have the same level of withstand voltage with
the power cable. (Comply with the local regulations on
extensions.)
WARNING
• In case of extending the electric wire, please DO NOT
use a round-shaped Pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.
Step 12 Setting the fan coil unit
addresses and installation options
The fan coil unit address setting and installation options
are set with the remote control option.
You cannot set both of the fan coil unit addresses and
the installation options in a batch: set both of them
respectively.
If you need to set the fan coil unit address and the
installation options, you must perform the setting work
twice.
Common steps for setting the addresses and
options
Entering the mode
for setting the
options
Setting the option
values
High Temp button
High Fan button
Mode button
Low Temp button
Low Fan button
1
Enter the mode for setting the options:
a
Remove the batteries from the remote control, and
then insert them again.
b
While holding down the
(High Temp) and
(Low Temp) buttons simultaneously, insert the
batteries into the remote control.
c
Make sure that you are entered to the mode for
setting the options:
Summary of Contents for AGTN1DKH Series
Page 41: ...41 English Appendix Memo ...
Page 42: ...42 Memo English Appendix ...
Page 43: ...43 English Appendix ...
Page 44: ...DB68 09309A 00 ...