7
English
Installation Pr
oc
edur
e
Installation Procedure
Step 1 Checking and preparing
accessories
The following accessories are supplied with the product.
Pattern sheet A (1)
Pattern sheet B (1)
Insulation pipe (2)
Flexible hose (1)
Insulation drain (1)
Rubber
Manual (2)
Cable-tie (3)
Air vent hose (1)
Installation gauge (1)
or
Step 2 Choosing the installation
location
Installation location requirements
• Air must be distributed optimally.
• The passage of air must not be disturbed.
• Condensation water must be drained easily.
• The support structure must be strong enough to
support the weight of the fan coil unit. (If the structure
is not strong, the fan coil unit may fall off, leading to
personal injury.)
• The ceiling must not be significantly sloped.
• There must be a sufficient space for maintenance and
service.
• The power and communication cables of the fan
coil unit must be at least 1 m away from electronic
appliances such as televisions. (Occasionally, more
distance may be required.)
Reinforcing the ceiling
Make sure that the ceiling is sufficient to support the
weight of the fan coil unit. If dangerous, reinforce the
ceiling with foundation bolts before installing the fan coil
unit.
Spacing requirements
(Unit: mm)
150 or more
150 or more
150 or more
1500 or more
Summary of Contents for AGTN1DKH Series
Page 41: ...41 English Appendix Memo ...
Page 42: ...42 Memo English Appendix ...
Page 43: ...43 English Appendix ...
Page 44: ...DB68 09309A 00 ...