background image

GB

METHOD 1   

Composite Video ...............

Good Quality

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.

METHOD 2  

Component (Progressive Scan) Video ...............

Best Quality

If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.

When the Progressive scan mode is selected, the VIDEO output (Yellow) and
SCART output does not output any signal.

Note

CONNECTIONS

16

Choose one of the two methods for connecting to a TV.

Connecting the Video Out to TV

METHOD 1

METHOD 2

15

WIRELESS RECEIVER MODULE

When the wireless receiving module setting is complete, no audio signal is output from the Rear Speaker OUT ports on the back
of the main unit.

The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture.

For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any
obstructions.

Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only.

In 2-CH mode, no sound will be heard from the wireless rear speakers.

Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does
not light up and the "REAR CHK" message blinks on the main unit's display.  
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.

With the main unit turned off, press and
hold the remote control's 

REMAIN

button

for 5 seconds.

Press the button until the POWER(

) indicator lights

up blue. (The indicator will turn off in 1 second.)

With the wireless receiver module
turned on, use a ball point pen or a pair
of tweezers to press the 

RESET

button

on the back of the unit.

The Standby/On LED on the front panel of the
wireless receiver module blinks 2 times.

2

1

Turn on the main unit.

The Link LED of the wireless receiver module is lit
and the setup is finished.

If Power Standby mode continues, repeat Steps 1 to
3 above.

3

Caution

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main
unit, some sound interruption may be heard due to interference.

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same
frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.

The transmission distance of radio wave is about 33 feet, but may vary depending on your operating environment. 
If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at
all, because the radio wave cannot penetrate metal.

Note

Resetting Wireless Communication

Connecting the optional Wireless Receiving Amplifier

HT-Q20(1~40P)-NOR- GB  3/20/06 9:37 AM  Page 18

Summary of Contents for AH68-01850K







































Reviews: