Airing Your Room
E-
10
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, push the ventilation lever on the front
of the unit to the right and the open position (
).
Result:
The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever to the left and the closed position (
).
Result:
The air simply circulates inside the room.
2
If necessary, press the
(On/Off) button.
Result:
◆
The operating mode indicator (COOL, FAN or HEATER)
on the unit comes on.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
◆
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
◆
Press the button on the remote control
or
◆
Press the button on the unit one or more times until the FAN
indicator lights up
Result:
◆
The unit beeps each time you press .
◆
The air conditioner starts up in Fan mode.
➢
◆
You can change modes at any time.
◆
When the air conditioner is in Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
Remote Control
Control Panel
4
To set the fan speed to...
Then...
Result:
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 11.
High
◆
Press the button on the remote control.
or
◆
Press the on the unit until the
indicator lights up
Med
◆
Press the button on the remote control.
or
◆
Press the on the unit until the
indicator lights up
Low
◆
Press the button on the remote control.
or
◆
Press the on the unit until the
indicator lights up
