Removing Excess Humidity
E-
13
ENGLISH
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
1
If necessary, press the (On/Off) button.
Result:
◆
The 5 Way indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
It will start up normally after three minutes.
2
If the is not displayed at the top of the remote control, press the
MODE button on the remote control one or more times until it appears.
Result:
◆
The indoor unit beeps each time you press the MODE button.
◆
The air conditioner runs in DRY mode.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can change modes at any time.
3
To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 65°F(18°C) and 86°F(30°C)
inclusive.
Result:
◆
Each time you press the TEMPERATURE buttons:
- The temperature is adjusted by 1°F(1°C)
- The indoor unit beeps
◆
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 15.
IM
PORTANT
