safety _
7
sAF
ety
SAVE THESE INSTRUCTIONS
SEVERE WARNING SIGNS fOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service company.
- Failing to do so may result in electric shock, fire, an explosion, problems with the product, or
injury.
Unpack oven, remove all packaging material and examine the oven for any damages such as
dents on the interior or exterior of the oven, broken door latches, cracks in the door, or a door
that is not lined up correctly. If there is any damage, do not operate the oven and notify your
dealer immediately.
Remove all foreign substances such as dust or water from the power plug terminals and contact
points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or fire.
Plug the three-prong power cord into a properly grounded outlet of standard 115-120 voltage,
60 Hz. Your oven should be the only appliance on this circuit.
- Sharing a wall socket with other appliances using a power strip or extending the power cord
may result in electric shock or fire.
- Do not use an electric transformer. It may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the product
specifications. Failing to do so may result in electric shock or fire.
Keep all packaging materials out of the reach of children. Children may use them for play.
Install the appliance while maintaining the proper distance from the wall.
- Failing to do so may result in fire due to overheating.
This appliance must be properly grounded. Read and follow the specific “Grounding Instructions”
found in the beginning of this Section.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure that it
is in accordance with local and national codes.
Do not cut or remove the third (ground) prong from the power cord under any circumstances.
Connect the oven to a 20A circuit. When connecting the oven to a 15A circuit, make sure that
circuit breaker is operable.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
- This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged
power cord or loose wall socket.
- This may result in electric shock or fire.
Do not operate any other heating or cooking appliance beneath this appliance.
Do not mount unit over or near any portion of a heating or cooking appliance.
Do not pull or excessively bend the power cord.
WARNING
AMW73F_W.indd 7
2010-02-12 4:57:20
