Using Digital Telecommunicator (cont.)
E-
24
1
Call a place where the digital telecommunicator is installed.
◆
Do not lay down the digital telecommunicator or put an obstacles
between the indoor unit and the telecommunicator.
◆
Distance between the indoor unit and the digital telecommunicator
should be less than 10m.
◆
Make sure that the power cable is plugged in before going out.
If power does not supplied to the digital telecommunicator,
you cannot operate the air conditioner by phone.
◆
You must turn on the air conditioner and the digital telecommunicator
before changing a password.
Caution
Select changing the password by pressing number 8.
2
◆
If you forget the password, press the RESET button on the
back of the digital telecommunicator. The password is set to
00.
◆
When the air conditioner is not controlled by phone after
changing a password, follow these instructions:
1. Turn the air conditioner off and press the buttons at
once on the indoor unit until the unit beeps.
2. After the indoor unit beeps, press the On/Off button on the
indoor unit once within 3 seconds. It will set the password
to 00.
3. Change the password by calling a place where the digital
telecommunicator is installed.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
Enter a new password.
3
Hang up the phone after confirmation.
4
To Change the Password
