Samsung APH-2807ERX, Owner'S Instructions Manual

ENGLISH

Starting to Heat

C

E-

11

You must select the HEAT mode if you wish to adjust the:

◆ 

Heating temperature

◆ 

Fan speed when Heating

1

Press MODE under the remote control flap one or more times until the
HEAT indicator is displayed.

2

Select the temperature by pressing the TEMP.SET 

▲ 

or 

▼ 

buttons one

or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.

3

Select the fan speed by pressing the FAN SPEED button one or more
times until the required setting is displayed:

Low

Medium

High

Auto

4

Control the air flow direction when necessary.
Refer to page 16.

5

Each time you change the temperature by one degree, 
the indoor unit beeps.
The air conditioner will only start cooling if the room temperature
is higher than the selected temperature.
The fan will, however, operate. During heating, the operating 
light is red.
During defrosting, LED may indicate temperature lower 
than real one.

NOTE

Each time you change the fan setting, the indoor unit beeps.
For the first 3 to 5 minutes the fan operates very slowly 
until the air has been sufficiently warmed.
Once the correct temperature has been reached, 
it will be automatically switched to the selected speed.

NOTE

The air conditioner is fitted with a protection feature which
prevents the unit from being damaged when it is started 
immediately after being:

◆ 

Switched on

◆ 

Stopped

After a rest period of three minutes, it will start up normally.

IMPORTANT

If necessary, press the ON/OFF(    ) button.

Result:

◆

The OPER. light on the indoor unit switches on.

◆ 

The operation mode previously set is displayed.

◆ 

The indoor unit beeps twice.

◆ 

The air conditioner starts up in the current mode.