E-
14
Selecting the Turbo Function
You can select the Turbo Function if you want to cool or heat your
room in the fastest way. After the 30 - minute operation with the
maximum setting, it returns to the previous setting.
Press the button.
Result:
◆
The temperature and fan settings are adjusted automatically.
◆
The fan speed indicator turns round with the maximum setting
and speed.
◆
The air conditioner cools or heats the room as quickly as possible.
◆
After 30 minutes, the air conditioner is reset automatically to the
previous setting.
◆
You can select the Turbo function in the Auto, Cool and Heat mode.
If you select this function in the Dry or Fan mode, the mode
changes to the Auto mode.
2
Press the button again to stop the Turbo Function before the end of the
30-minute period.
Result:
The air conditioner is reset automatically to the previous setting.
3
To control the airflow direction, refer to page 19.
4
1
If necessary, press the (On/Off) button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode you selected last.
◆
The indoor unit beeps.
Control Panel
AS09HPCN IB_E_24445 10/31/05 6:54 PM Page 14
