E-
22
Troubleshooting Guide
Before contacting the service center, check the following. It will save your time and the
expense of an unnecessary call.
Explanation/Solution
◆
Check if the circuit breaker of the air conditioner is switched on.
◆
Check if the air conditioner is turned on. If necessary, press the
button on the remote control.
◆
Check if the Timer indicator on the indoor unit is on.
If so:
- Wait until the set time is reached and the air conditioner starts
automatically.
- Cancel the Timer. (See pages 16 and 17 for further details)
◆
Check if there are no obstacles in front of the indoor unit.
◆
Check the remote control batteries.
◆
Make sure that you are within 7 meters from the indoor unit.
◆
Check if you are pointing the remote control at the remote control
sensor on the right side of the indoor unit.
◆
Replace the remote control batteries if necessary.
◆
Check if the correct operating mode has been selected
(Auto, Cool).
◆
The room temperature may be too low.
◆
Check if the air filter is dirty; refer to page 23 for cleaning instructions.
◆
Check that there is no obstacle in front of the outdoor unit.
◆
Check if the mode is set to the Auto, Cool or Fan mode;
in the Dry mode, the fan speed changes automatically.
◆
Check if the air conditioner has been turned on; if necessary, press
the button on the remote control.
◆
Check if the timer is set correctly; see pages 16 and 17.
◆
You can use the Fan mode to ventilate your room.
Problem
The air conditioner does not
operate.
The air conditioner does not
operate with the remote control.
No beep is heard when you press
the on the remote
control.
The air conditioner does not cool.
The fan speed does not change
when you press the button.
The airflow direction does not
change when you press the
button.
The timer is not correctly triggered.
Odor permeates into the
room during operation.
