Basics
38
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
On the desktop, right-click the Start button ( ) and select
Control Panel
→
Network and Internet
→
Network and
Sharing Center
→
Change adapter settings
.
2
Right-click
Ethernet
and select
Properties
.
3
Select
Configure...
→
Power Management
→
Allow this
device to wake the computer
→
OK
.
5
Configure the IP settings.
•
When using DHCP, select
Obtain an IP address
automatically
.
•
When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select
Use the
following IP address
and set the IP address manually.
6
Select
OK
to save the settings.
