background image

Solving Common Problems

E-

14

Before contacting the after-sales service, perform the following simple checks.
They may save your time and expense of an unnecessary call.

Explanation/Solution

Check that the breaker used for the air conditioner is switched on.

Problem

The air conditioner does not
operate at all

Check that there are no obstacles between you and the remote 

control sensor.

Check the wireless remote controller batteries

Check that you are close enough to the remote control sensor. 

(7 metres/yards or less).

Check that you are pointing the remote controller at the remote 

control sensor on the indoor unit.

Replace the remote controller batteries if necessary.

If there is a strong light around the air conditioner, a 
three-wavelength light, a neon sign, etc., for example, 

the air conditioner may not be operated with a remote controller. 
If this happens, use the remote controller close by the remote 
control sensor.

Check that the correct operating mode has been selected. 

The room temperature may be too low or too high.

Dust may be blocking the air filter guard; refer to page 11 or 12 

for cleaning instructions.

Check that there is no obstacle in front of the outdoor unit.

The air conditioner does not
operate with the remote 
controller

Wireless Remote Controller

Wireless Remote Controller

No beep is heard when you 
press       (ON/OFF) on the 
remote controller

The air conditioner does 
not cool or heat

is displayed on the wired remote controller. In this case, 

turn the air conditioner off and contact your dealer.

Wired Remote Controller

The air conditioner does not
operate with the remote controller

In case of using the wired remote controller for a group, the air 

conditioners connected to the remote controller are turned on/off in
order. Thus, it takes some time(up to 32 seconds).

Wired Remote Controller

When turning on/off the 
air conditioner, it is not 
turned on/off immediately.

Check that the required temperature has been set correctly.

Increase the fan speed.

When heating, the required 
room temperature is never 
reached and the air 
conditioner frequently stops

Summary of Contents for AVMWC020CA0

















Reviews: