background image

The following safety precautions must be taken when installing 
and using your air conditioner.

Safety Precautions

1

The air conditioner must be plugged into its own specific power source, which must be
installed in compliance with national wiring, earthing and safety regulations.

Depending on national regulations and your specific installation, you may need to install:

◆ 

A circuit breaker

For further information on electrical requirements, contact a professional electrician.
This air conditioner must be connected by a licenced electrician.
This device must be installed according to the national electrical rules.

2

Make sure that the unit is correctly ventilated at all times; 
do NOT place clothing or other materials over it.

3

NEVER spill liquid of any kind into the unit. 
Should this happen, unplug the unit and contact your installation specialist.

4

Do NOT insert anything between the air outlet blades, as the inner fan may be damaged 
and you may be hurt. Keep children away from the unit.

5

ALWAYS ensure that the power cable is in good condition. 
Make sure that it is not walked on or damaged by items placed on or against it.

If the power cord is damaged in any way, it must be replaced by an approved 
power cord available from the manufacturer or its service agent.

6

Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:

◆ 

An approved service center

◆ 

The outlet at which the air conditioner was purchased

7

Do NOT place any obstacles in front of the unit.

8

If the remote control will not be used for a long time, remove the batteries.

9

Before throwing out the device, it is necessary to pull back the battery cells and get rid
of them safely.

10

The appliance is not intended for use by young children or infirm person without supervision;
young children should be supervised to ensure that they do not play with the appliance.

The manufacturer do not take the responsibility of the accident happened
because the air conditioner is not fixed firmly or installed securely, during
installing or using the product. In case you have difficulty in installation,
you must ask for an installation specialist help. The accident will be hap-
pened in case of installing improperly.

C

C

C

A

A

U

U

T

T

I

I

O

O

N

N

E-

2

Summary of Contents for AW07A7B



















Reviews: